Technical Specifications
ConvertaMAX 20 ConvertaMAX
26
Cleaning Width: 20” (51cm) 26”
(66cm)
Cleaning Rate (theory); 26,500 sq. ft. per hour 34,500 sq. ft. per hour
(average): 11,700 sq. ft. per hour 15,6000
sq. ft. per hour
Solution Tank: 20 gal. capacity, roto-molded polyethylene, w/
drain hose
Solution Feed System: Electric solenoid valve for on/off control, manual ball
valve for flow control. Max 0.8 gal./min. flow rate
Recovery Tank: 20 gal. capacity, roto-molded polyethylene,
equipped w/ ball-
float vacuum air shut off.
31” long 1.5” diameter drain hose
Scrub Brushes: One 20” diameter disk Two 13” diameter disk
brush or pad holder brushes or pad holders
Brush Speed: 200 r.p.m. 220 r.p.m.
Brush Pressure: Low – 45 lbs. Low – 70 lbs.
High – 85 lbs. High – 110 lbs.
Squeegee: 30.5” w/four-sided wiping blades 36.25 w/four-sided wiping blades
Brush Drive Motor(s): One 1 hp, 746 watt motor Two .75 hp, 560 watt motors
Vacuum Motor: .75 hp, 570 watt, three-stage .75 hp, 570 watt, three-stage
Drive System: .5 hp, 373 watt motor. Variable speeds forward & reverse.
Up to 265 ft./min. scrubbing, 290 ft./min. transport
Power Source: Four 6 v/238 AH batteries (standard) Four 6 v/238 AH batteries
Construction: Solid 8-gauge unitized steel frame is zinc plated, yellow chromated and
painted to resist rust
Weights: 362 lbs. w/o batteries 384
lbs. w/o batteries
626
lbs. w/o batteries 648
lbs. w/o batteries
|
Return To Automatic Scrubbers Page |